Whether you're driving a 2020 Ford Fusion S or a Titanium trim, following the correct maintenance schedule is key to keeping your vehicle running smoothly for years to come. This guide covers the complete Ford Fusion maintenance schedule based on expert dealer recommendations, OEM intervals, and real-world owner insights from 2013 to 2020 model years.

Why Routine Maintenance Matters

Even a reliable vehicle like the Ford Fusion requires regular service. Neglecting routine care—such as oil changes or transmission flushes—can lead to engine damage, reduced mileage, and costly repairs.

Most models feature an Intelligent Oil-Life Monitor to help track engine oil condition, but it’s your responsibility to stay on top of other components like filters, fluids, brakes, and belts.

Ford Fusion Maintenance Schedule by Mileage

This maintenance schedule consolidates recommendations from Ford dealerships, OEM sources, and experienced Fusion owners.

Every 5,000 to 7,500 Miles (or Every 6–12 Months)

Oil and Filter Change: 1. For normal driving: every 7,500 to 10,000 miles. 2. For severe conditions (extreme temperatures, short trips, dusty roads): every 5,000 to 7,500 miles

Tire Rotation

Brake System Inspection (pads, rotors, hoses, parking brake)

Fluid Checks and Top-offs (brake fluid, coolant, washer fluid)

Multi-point Inspection

Inspect exhaust system, steering and suspension components, half-shaft boots, driveshaft, and U-joints.

Every 20,000 Miles

Replace Cabin Air Filter: Improves interior air quality and HVAC performance.

Repeat all items from the 5,000-mile service

Every 30,000 Miles

Replace Engine Air Filter: Keeps debris out of the engine and maintains performance.

Optional: Fuel System Cleaning. Especially beneficial for older Fusions or those used in dusty areas.

Every 50,000 to 60,000 Miles

Transmission Fluid Change: While Ford suggests up to 150,000 miles, many owners recommend changing fluid every 30,000 to 60,000 miles, especially for 6-speed automatics or hybrid eCVT systems.

Brake Fluid Replacement: Typically required every 5 years or as needed based on moisture testing.

Coolant Flush (Optional Based on Testing): Though the factory interval is 100,000 miles, early testing or replacement may be beneficial.

Spark Plug Inspection: Replace if fouled or worn, especially for turbocharged models.

Every 100,000 Miles

Replace Spark Plugs: Ensures efficient combustion and engine performance.

Coolant Change: Helps prevent overheating and corrosion. After the initial flush, replace coolant every 50,000 miles or three years.

Inspect Drive Belts and Timing Chain: The Fusion uses timing chains, which are durable but should still be checked for wear.

Every 150,000 Miles

Automatic Transmission Fluid Change (if not already done earlier)

Accessory Drive Belt Replacement

Inspect Timing Chain Tensioners and Pulleys

Ford Fusion Hybrid and Plug-In Hybrid Differences

Fusion Hybrid and Fusion Energi (Plug-in Hybrid) models follow a similar schedule but with added focus on electric components:

Common Wear Items: When to Replace

Ford Fusion Maintenance Costs

According to RepairPal, the average annual maintenance cost for a Ford Fusion is around $582. Hybrids may cost slightly less due to reduced brake wear.

Common Repairs and Services:

Enhance Your Visibility: Upgrade to SEALIGHT LED Headlights

If you're still using factory halogen bulbs, you're missing out on better nighttime visibility and safety. Upgrade your Ford Fusion with SEALIGHT LED headlight bulbs—they’re bright, durable, and easy to install.

Use the Ford Fusion Bulb Finder to find the exact fit for your model.

Adhering to the Ford Fusion maintenance schedule is one of the smartest ways to protect your investment. From regular oil changes and fluid flushes to hybrid-specific checks, following these intervals helps reduce breakdowns, maintain fuel efficiency, and extend the life of your vehicle.