SEALIGHT® S2S 9006/HB4 LED Fog Light Bulbs 6500K White 30W 12000LM IP68 2PCS
Product Specifications
| Brand | SEALIGHT |
|---|---|
| Light Source Type | LED |
| Application | Fog Light Bulbs |
| Item Model Numer | 9006/HB4 |
| Chips Quantity/Pair | 24PCS 7035 CSP Chips |
| Color | White |
| Color Temperature | 6500K |
| Lumens | 12,000 Lumens |
| Wattage | 30W/Pair |
| Waterproof Grade | IP68 Waterproof and Dustproof |
| Lifespan | 50,000 Hours |
| Package Included | 2*LED Fog Light Bulbs, 1*User Manual |
-
Free Shipping on All U.S. Orders
Free shipping on all orders to the contiguous U.S. Most orders ship within 1–2 business days and arrive in 2–5 business days.
-
90-Day Free Returns
Not satisfied? Return your unused, uninstalled item within 90 days for a full refund. Quality issues? We cover the return shipping.
-
1-Year Warranty
SEALIGHT products are covered by a 1-year warranty from the date of purchase. If you experience a quality-related issue, contact us and we'll make it right.
-
Vehicle-Specific Fit, Guaranteed
All parts are guaranteed to fit your vehicle. Wrong part? Contact us — we'll verify your fitment and find the right solution.
Highlights
- 6500K White Output: SEALIGHT S2S 9006/HB4 LED fog light bulbs deliver 12,000 lumens at 30W per pair. Bright white light helps improve visibility in fog and rain.
- 24 CSP Chips: Each pair uses 24 7035 CSP chips to provide clear fog-light illumination in low-visibility conditions.
- Easy Plug-and-Play Installation: A built-in power supply, compact base, and non-polarity design help the S2S 9006/HB4 fog light bulbs connect to factory sockets without tools.
- IP68 Protection: IP68 water- and dustproof protection helps shield the 9006/HB4 LED fog light bulbs in wet and dusty conditions.
- 50,000-Hour Lifespan: Rated for 50,000 hours, SEALIGHT S2S LED fog light bulbs are built for long-term use and fewer replacement cycles.
This Part Fits These Vehicles
Product Description
FAQs
Q1. Which sockets does the S2S 9006 fit?
A1. 9006 and HB4 are two names for this base, so the pair fits either socket; the marking on the old bulb confirms which one you have.
Q2. Is the body compact enough for a tight lamp?
A2. Yes. The driver is built into the base rather than hanging on a lead, so the space behind the bulb stays close to the halogen it replaces.
Q3. Does 30W need heavier wiring?
A3. No. The pair draws about 2.5A at 12V, against 9.2A for two 55W 9006 halogens, so no relay and no heavier wire is needed.
Q4. Will it fit under a shallow dust cap?
A4. Usually, since the body is short; with a hard plastic cap, measure the clearance first, because the cap has to close over the connector.
Q5. Will it look right behind a projector lens?
A5. It fills the projector evenly because the chip sits at the focal point; if the top edge is fuzzy, reseat the bulb so it sits square in the holder.
Reviews

















